Cleaning and Maintenance of Solid Wood Screen-The Function of Solid Wood Screen

Cleaning and Maintenance of Solid Wood Screens - Function of Solid Wood Screens

Purchase Tips for Solid Wood Screens

1. Determine whether "Solid Wood Screens" is really made of solid wood, or indicate where is solid wood and where is natural board. Glance to the mystery of solid wood: wood grain and scars.

2. Check whether the wood can be boring and white, and whether the texture is tight and delicate.

3. Is the interface between the edge, top, back and back of the solid wood screen connected by tenon joints, joints, or double concealed pins connected?

4. Check the board strength. The board surface emphasizes that you can press it with your fingers to feel the fastness of the board surface. If the skeleton is sparse, you will feel that the appearance is untrue and the panel will tremble very much. When the panel is covered with thin wood and other information, the color should be similar to the complete set of products. The product exterior paint film does not allow wrinkles, stickiness or leakage of paint. Introduction to solid wood screens

Solid wood screens are generally furnished in prominent places in the room, playing the role of separation, beautification, windproofing, and coordination. It complements each other, complements each other, and is integrated into one, becoming an inseparable whole for home decoration, presenting a kind of harmonious beauty and tranquility beauty.

Cleaning and maintenance of solid wood screens

1. Wax the solid wood screens at least once a year, and use special furniture paste wax to apply a layer of wax to the furniture. And before waxing, apply milder non-alkaline soapy water to remove the old wax.

2. Solid wood screens should be kept away from humidifiers. Solid wood screens should be kept warm to prevent cracking. However, be careful not to place the humidifier directly on the solid wood screen, or be too close to the heater for a long time, as this will cause local moisture to cause mold and expansion. And do not place solid wood screens in direct sunlight, as this will cause local paint film to fade or premature aging and deformation of the wood, so for solid wood screens, relatively cool and ventilated places are the best choice.

3. If you encounter moldy solid wood screens, you can first use a clean soft cloth to dip it in a neutral detergent or furniture-specific detergent to remove it. Then gently apply a layer of furniture wax or furniture-specific essential oil on the moldy part, and put a piece of soap or gauze bag filled with dried tea residue in the moldy area to help eliminate the moldy smell.

4. Maintain good humidity, the ideal humidity is about 40%. If you use air conditioning for a long time, you can put a basin of water next to it. The temperature difference should not be too large to avoid the air conditioner turning on and off frequently, causing severe temperature changes.