Characteristics of wire-clip glass - How to clean wire-clip glass?
Features of wire-clipped glass - How to clean wire-clipped glass? Features of wire-clad glass
Security
Wire-clad glass can prevent fragments from scattering. Even when the glass is broken, it is difficult to fly away even when the glass is broken, so it is not easy to cause the fragments to fly away and hurt people compared with ordinary glass.
Fireproof
Smart glass can hold up the fragments even if it is broken, and it is difficult to collapse and break. Even when the flame breaks through, it can block the invasion of the flame and the fire powder, and prevent diffusion and burning from the opening.
According to Article 64 of the Japanese Building Standards Law, fire doors are stipulated. The opening of the outer wall must prevent the flame from spreading and spreading. The wire-clamped glass is used in combination with the frame of Type B fire-proof door, and can be used as Type B fire-proof material.
Anti-theft resistance
Ordinary glass is easy to break, so thieves can sneak in for illegal activities, while wire-clamped glass is not the case. Even if the glass is broken, there is still a metal wire mesh at work, so it is impossible for a thief to steal easily. The anti-theft properties of wire-clad glass bring people a sense of psychological security.
Since there is a wire or mesh in the wire-clamped glass, the integrity of the wire-clamped glass has been greatly improved. Avoid overall collapse during damage, thus having certain fireproofing and safety effects. The disadvantage of wire-clamped glass is that it has poor perspective because there is a wire mesh inside, which has certain interference to the visual effect. Secondly, the metal wire exposed on the edges of the glass is easily corroded. The safety of wire-clamped glass and wire-clamped glass remains intact when damaged. The fragments of the glass will not dissipate under the pull of the wire, reducing damage to the human body. It can be used in skylights, roofs, indoor partitions and other occasions where debris are prone to injuring people. In addition, since wire mesh glass is not easy to penetrate, it also has a certain anti-theft effect when used in doors and windows. Clamping glass can also be used as a fireproof material for secondary doors and windows. Ordinary glass is susceptible to heat breaking and shattering when a fire occurs, causing air flow and fire to spread. Although the glass with wire mesh explodes in a fire, it will not collapse and pierce due to the support of metal wire or mesh. It can maintain integrity to a considerable extent, prevent the flow of air, and have a good effect on the spread of the fire. Wire clamping and mesh clamping glass are also suitable for shock-proof occasions, such as buildings with high requirements for earthquake protection and factories with industrial vibration. Wire clamping and mesh glass improve the brittle properties of flat glass and is a low-cost and widely used architectural glass.
Cleaning and maintenance of wire-clad glass
1. Do not hit the glass surface hard in normal times. To prevent scratching of the glass surface, it is best to lay a tablecloth.
2. Once the patterned frosted glass is dirty, you can use a toothbrush dipped in detergent and wipe it in circles along the pattern to remove it. In addition, you can also drip some kerosene on the glass or apply chalk ash and gypsum powder dipped in water on the glass to dry, and then wipe it with a clean cloth or cotton, so that the glass is both clean and bright.
3. When cleaning daily, just wipe it with a wet towel or newspaper. If stains occur, you can wipe it with a towel dipped in beer or warm vinegar. Avoid cleaning it with a solution with strong acidity and alkalinity.
4. It is best to place glass furniture in a relatively fixed place and do not move back and forth at will; place objects smoothly, and heavy objects should be placed at the bottom of the glass furniture to prevent the furniture from overturning due to unstable center of gravity.
5. Using plastic wrap and a wet cloth sprayed with detergent can also allow glass that is often covered with oily stains, "regain new life". First, spray the glass with detergent and apply plastic wrap to soften the solidified oil stains. After ten minutes, tear off the plastic wrap and wipe it with a damp cloth. If there is handwriting on the glass, you can use an eraser to rub it with a friction and then wipe it with a wet cloth; if there is paint on the glass, you can use cotton to dip it in hot vinegar; if there is cleaning and dry cloth to wipe the glass with alcohol, it can make it as bright as crystal.
